（水平對整加旋轉/快速換模）DX-3型 定子整形機
DX-3 Model Stator Forming Machine
本機適用于發電機定子線圈嵌線后，線圈端部整形的專用設備。采用三菱PLC程控，中文液晶顯示界面，本機有水平向心推進來整上下繞組的外形，由上下模整定子繞組內徑，水平動作一致，后旋轉180°再動作一次完成，更換工裝僅四個零件，極為方便，適合多品種生產。
Suitable for generator stator coil embedded line, the coil end of the special equipment shaping.Mitsubishi PLC program control, the Chinese LCD display interface, the machine has a horizontal to the heart to promote the shape of the upper and lower winding, the stator winding stator diameter, Four parts, very convenient, suitable for multi-species production.
技術參數/Technicai Parameters
| 電源電壓Supply voltage | AC380V±10% 50Hz |
|
總功率Total power |
3kw |
|
液壓壓力Hydraulic Pressure |
0~7MPa |
| 最大定子內徑Max.Stator ID | ≤Φ120 mm |
| 最小定子內徑Stator ID |
≥Φ60 mm |
| 定子疊厚Core thickness |
15~60mm |
浙公網安備 33102202000120號
